View BNC-P-3-CF_5331312.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

http://www.ddknet.co.jp please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. bnc series bnc style connector 121226 jis-c-5412,mil-prf-39012,dsp-c-6202 frequency range dc to 2ghz 50 lock type bayonet characteristic impedance conforming standard 3p)4 $pnqmjbou 3p)4 $pnqmjbou item material / finish shell (body) copper alloy / ni or ag plating contact (male) copper alloy / ag or au plating contact (female) copper alloy / ag or au plating insulator ptfe gasket silicon rubber characteristic impedance 50 rated voltage 500vac(r.m.s.) dielectric withstanding voltage 1500v ac(r.m.s.) for 1 minute insulation resistance 1000m mim. at 500v dc contact resistance 3m max. v.s.w.r. 1.3 max. at dc to 2ghz operating temperature -55 ? +85 specifications the specifcations are typical but may not apply to all connecto rs. and if the cable is not 50 , the specifcation will be changed. please check the specifcations on each item with its drawing from us when you use. material/finish ? bnc style connector is one of the most popular 50 coaxial connector. ? bayonet coupling mechanism for reliable connection. it is suitable for the frequent connection ?when you use 75 cable, the frequency shall be less than 200mhz. when the frequency is more than 200mhz, please chose bnc75 series. ? bnc75 series (75 type bnc style connector) can be mated. feature
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. 2 sraight cable plug part number applicable cable a l finish assembly instruction outer conductor center conductor BNC-P-3-CF 3d-2v 6.4 25.0 ag ag 1 3c-2v bnc-p-3-ni-cf 3d-2v 6.4 25.0 ni ag 1 3c-2v bnc-p-3-nicau-cf 3d-2v 6.4 25.0 ni au 1 3c-2v bnc-p-58u-cf rg-55/u 5.4 27.0 ag ag 1 rg-58/u bnc-p-58u-ni-cf rg-55/u 5.4 27.0 ni ag 1 rg-58/u bnc-p-62u ` cf rg-62/u 6.6 26.2 ag ag 1 bnc-p-62u-ni-cf rg-62/u 6.6 26,2 ni ag 1 ug-260/u-cf rg-59/u 6.55 24.6 ag ag 1 rg-62/u ug-260/u-ni-cf rg-59/u 6.55 24.6 ni ag 1 rg-62/u part number applicable cable a l finish assembly instruction outer conductor center conductor bnc-p-5-cf 5d-2v 8.6 37.0 ag ag 1 5c-2v bnc-p-5-ni-cf 5d-2v 8.6 37.0 ni ag 1 5c-2v bnc-p-5w-cf 5d-2w 9.2 37.0 ag ag 1 5c-2w bnc-p-5w-ni-cf 5d-2w 9.2 37.0 ni ag 1 5c-2w clamp type ?? #/$1 - " #/$18 - " #/$1 " - #/$17$3$' " - " #/$1$2&8$3 - " #/$1$$3 ?? #/$1 - " #/$18 - " #/$1 " - #/$17$3$' " - " #/$1$2&8$3 - " #/$1$$3 part number applicable cable a l finish assembly instruction outer conductor center conducto r bnc-p-3w-cf 3d-2w 7.1 29.1 ag ag 1 3c-2w bnc-p-3w-ni-1-cf 3d-2w 7.1 29.1 ni ag 1 3c-2w ?? #/$1 - " #/$18 - " #/$1 " - #/$17$3$' " - " #/$1$2&8$3 - " #/$1$$3
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. straight cable plug 3 part number applicable cable a finish assembly instruction crimp tool outer conductor center conductor bnc-p-1.5v-cr-cf 1.5d-2v 5.5 ag ag 3 cr-h-1100 1.5c-2v bnc-p-1.5v-cr-ni-cf 1.5d-2v 5.5 ni ag 3 cr-h-1100 1.5c-2v bnc-p-1.5v-cr-nicau-cf 1.5d-2v 5.5 ni au 3 cr-h-1100 1.5c-2v bnc-p-2.5v-cr-cf 2.5d-2v 5.5 ag ag 3 cr-h-1100 2.5c-2v bnc-p-2.5v-cr-ni-cf 2.5d-2v 5.5 ni ag 3 cr-h-1100 2.5c-2v bnc-p-2.5v-cr-nicau-cf 2.5d-2v 5.5 ni au 3 cr-h-1100 2.5c-2v bnc-p-179u-cr-cf rg-179/u 5.5 ag ag 3 cr-h-1100 bnc-p-179u-cr-ni-cf rg-179/u 5.5 ni ag 3 cr-h-1100 crimp type ?? #/$1 - " #/$18 - " #/$1 " - #/$17$3$' " - " #/$1$2&8$3 - " #/$1$$3 part number applicable cable a l finish assembly instruction crimp tool note outer conductor center conductor bnc-p-1.5cqew-cr10-cf 1.5c-qew 5.5 24.3 ni au ` cr-h-1100 delta-mate bnc-p-1.5d-cr10-cf 1.5d-xv 4.0 23.3 ni au 4 cr-h-1120a delta-mate 1.5d-qew bnc-p-3c-cr10-boot-cf 3c-2v 7.1 24.3 ni au 4 cr-h-1116 delta-mate bnc-p-3d-cr10-boot-cf 3d-2v 7.1 24.3 ni au 4 cr-h-1116 delta-mate bnc-p-58u-cr10-cf rg-58/u 6.3 24.3 ni au 4 cr-h-1115 delta-mate rg-58a/u bnc-p-3d-cr10-cf 3d-2v 7.1 24.3 ni au 4 cr-h-1116 delta-mate part number applicable cable a l finish assembly instruction crimp tool outer conductor center conductor bnc-p-3c-cr1-cf 3c-2v 7.0 28.0 ag ag 2 cr-h-1102 bnc-p-3c-cr1-ni-cf 3c-2v 7.0 28.0 ni ag 2 cr-h-1102 ?? #/$1 - " #/$18 - " #/$1 " - #/$17$3$' " - " #/$1$2&8$3 - " #/$1$$3 ?? #/$1 - " #/$18 - " #/$1 " - #/$17$3$' " - " #/$1$2&8$3 - " #/$1$$3
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. right angle cable plug 4 clamp type part number applicable cable a finish assembly instruction outer conductor center conductor bnc-lp-3-cf 3d-2v 6.4 ag ag 5 3c-2v bnc-lp-3-cau-cf 3d-2v 6.4 ag au 5 3c-2v bnc-lp-3-nicau-cf 3d-2v 6.4 ni au 5 3c-2v bnc-lp-3-ni-cf 3d-2v 6.4 ni ag 5 3c-2v bnc-lp-58u-cf rg-55/u 5.38 ag ag 6 rg-58/u bnc-lp-58u-ni-cf rg-55/u 5.38 ni ag 6 rg-58/u bnc-lp-55u-cf rg-55/u 5.4 ag ag 6 rg-58/u part number applicable cable finish assembly instruction outer conductor center conductor bnc-lp-5-cf 5d-2v ag ag 7 5c-2v bnc-lp-5-ni-cf 5d-2v ni au 7 5c-2v ????????? #/$-1 " #/$-1 ??? - " #/$+ ????y#/$1+ - " ? # ? ? ????????? #/$-1 " #/$-1 ??? - " #/$+ ????y#/$1+ - " ? # ? ? straight cable jack clamp type part number applicable cable a (l) finish assembly instruction outer conductor center conductor bnc-j-3-cf 3d-2v 6.4 28.5 ag ag 1 3c-2v bnc-j-3-ni-cf 3d-2v 6.4 28.5 ni ag 1 3c-2v bnc-j-58u-cf rg-55/u 5.4 28.6 ag ag 1 rg-58/u ????????? #/$-1 " #/$-1 ??? - " #/$+ ????y#/$1+ - " ? # ? ?
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. straight panel cable jack 5 part number b finish outer conductor center conductor bnc-r-cf 3.1 ag ag bnc-r-ni-cf 3.1 ni ag ug-290/u-cf m2.6 ag ag ug-290/u-ni-1-cf m2.6 ni ag part number applicable cable a b (l) finish assembly instruction outer conductor center conductor bnc-pj-3-cf 3d-2v 6.4 3.0 28.5 ag ag 1 3c-2v bnc-pj-3-ni-cf 3d-2v 6.4 3.0 28.5 ni ag 1 3c-2v bnc-pj-58u-cf rg-55/u 5.4 3.0 28.5 ag ag 1 rg-58/u bnc-pj-58u-ni-cf rg-55/u 5.4 3.0 28.5 ni ag 1 rg-58/u bnc-pj-58u-nicau-cf rg-55/u 5.4 3.0 28.5 ni au 1 rg-58/u clamp type ????????? #/$-1 " #/$-1 ??? - " #/$+ ????y#/$1+ - " ? # ? ? receptacle jack panel mounting dimensions ??? #/$3$' ? ? ? #/$-3/j ? # #/$31$ ? ? ? ? ??? #/$3$' ? ? ? #/$-3/j ? # #/$31$ ? ? ? ? part number finish outer conductor center conductor bnc-lr-cf ag ag bnc-lr-ni-cf ni ag panel mounting dimensions panel mounting dimensions
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. receptacle jack 6 ??? #/$3$' ? ? ? #/$-3/j ? # #/$31$ ? ? ? ? part number finish note outer conductor center conductor bnc-r-pc-4-ag-cf ni ag board lock is ag plating bnc-r-pc-4-d1-cf ni au board lock is ag plating. part number finish note outer conductor center conductor bnc-lr-pc-4-ag-cf ni ag board lock is ag plating bnc-lr-pc-4-nicau-cf ni au board lock is ag plating #/$-31$"h ??? ???????? #/$3# #/$13 #/$6 ? ? ? ? ? ? ? y)fy%jb y)fy%jb #/$-31$"h ??? ???????? #/$3# #/$13 #/$6 ? ? ? ? ? ? ? y)fy%jb y)fy%jb part number finish outer conductor center conductor bnc-pr-cf ag ag bnc-pr-ni-cf ni ag pcb mounting dimensions pcb mounting dimensions panel mounting dimensions
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. 7 straight bulkhead cable jack part number finish outer conductor center cnductor bnc-rb2-cf ag ag bnc-rb2-ni-cf ni ag bnc-rb2-nicau-cf ni au #/$-31$"h ??? ???????? #/$3# #/$13 #/$6 ? ? ? ? ? ? ? y)fy%jb y)fy%jb panel thickness1.2 ? 3.5 #/$-31$"h ??? ???????? #/$3# #/$13 #/$6 ? ? ? ? ? ? ? y)fy%jb y)fy%jb part number finish outer conductor center conductor ug-625/u-cf ag ag ug-625/u-ni-cf ni ag panel thickness1.2 ? 3.5 part number finish outer conductor center conductor ug-604/u-cf ag ag ug-604/u-ni-1-cf ni ag 6(6 ???????? 6(6 6(6 #/$3#1 #/$3# )fy%jb )fy%jb y)fy%jb y)fy%jb y)fy%jb panel thickness0.7 ? 2.4 panel thickness2.2 ? 6.0 6(6 ???????? 6(6 6(6 #/$3#1 #/$3# )fy%jb )fy%jb y)fy%jb y)fy%jb y)fy%jb part number finish note outer conductor center conductor ug-657/u-cf ag ag independent waterproof with frange o-ring ug-657/u-ni-cf ni ag independent waterproof with frange o-ring 6(6 ???????? 6(6 6(6 #/$3#1 #/$3# )fy%jb )fy%jb y)fy%jb y)fy%jb y)fy%jb panel thickness2.2 ? 3.1 part number finish outer conductor center conductor ug-1094/u-cf ag ag ug-1094/u-d1-cf ni au panel mounting dimensions panel mounting dimensions panel mounting dimensions panel mounting dimensions panel mounting dimensions
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. dust cap straight bulkhead cable jack part number finish note outer conductor center conductor bnc-rbp1-cf ag ag independent waterproof with frange o-ring bnc-rbp1-ni-cf ni ag independent waterproof with frange o-ring 6(6 ???????? 6(6 6(6 #/$3#1 #/$3# )fy%jb )fy%jb y)fy%jb y)fy%jb y)fy%jb 6(6 ???????? 6(6 6(6 #/$3#1 #/$3# )fy%jb )fy%jb y)fy%jb y)fy%jb y)fy%jb part number finish note outer conductor center conductor bnc-rb-cf ag ag with frange o-ring bnc-rb-ni-cf ni ag with frange o-ring panel thickness2.2 ? 7.0 panel thickness2.6 ? 6.4 8 #/$$4$' $'
& ; ? ? y#???

.bsljoh y+$86$'%%, #/$+$$' $'
? #/$+$$'%%,
&??#/$??
.bsljoh%%, #/$tuzmfnbujohtjef ? part number finish bnc-cs-cf ag bnc-cs-ni-cf ni part number finish bnc-jc-cf ag bnc-jc-ni-cf ni part number finish bnc-rc-3 ni bnc-rc-3-d1 ag short cap short cap panel mounting dimensions panel mounting dimensions
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. cut the cable as fg.1. please be carefule to not damage the outer conductor. insert the nut, washer, gasket and clamp. the clamp is located on the outer conductor of the cable. pick the outer conductor. cut the insulator and center conductor as fg.3. fold up the outer conductor to the clamp equally and cut the outer conductor of the cable along the clamp as fg.3. please be careful to not damage the center conductor. solder up the contact to the center conductor. please be careful to not be swelled up the solder. please be careful to not gap between contact and insulator. please be careful to not deform the insulator by soldering assembly instruction1 9 insert the body into the above cable assembly and screw up the nut. please screw up the nut by wrench tightly. (btlfu /vu 8btifs $mbnq .bmf$poubdu 1mvh#pez 'fnbmf$poubdu +bdl#pez (btlfu $mbnq .*-$mbnq " # $ /vu 8btifs (btlfu $mbnq #pez %jb} )fy%jb} $bcmfbttfncmz $poubdu 4pmefsjoh /p(bq (btlfu /vu 8btifs $mbnq .bmf$poubdu 1mvh#pez 'fnbmf$poubdu +bdl#pez (btlfu $mbnq .*-$mbnq " # $ /vu 8btifs (btlfu $mbnq #pez %jb} )fy%jb} $bcmfbttfncmz $poubdu 4pmefsjoh /p(bq parts confgulration applicable cable a 5d-2v, rg-59/u, rg-62/u 10mm 3d-2v, 5d-2w rg-55/u, rg-58/u 15mm 3d-2w 12mm applicable cable b c 3d-2v, 3d-2w, rg-55/u, rg-58/u 6mm 3mm 5d-2v 7mm 5mm rg-59/u, rg-62/u 5.5mm 3mm 5d-2w 7.2mm 5.4mm applicable cable recommended tightening torque 3d-2v, rg-55/u, rg-58/u 117.6 ? 147n?cm(12 ? 15kgf?cm) rg-59/u, rg-62/u, 3d-2w 196n?cm(20kgf?cm) 5d-2v 441n?cm(45kgf?cm) 5d-2w 490 ? 686n?cm(50 ? 70kgf?cm)
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction2 10 " # #ppu 'fsvmf $foufs$poevdups #pez nn nn nn nn ?nn &ehfpg#pez &ehfpg$sjnq%jft #ppu " # #ppu 'fsvmf $foufs$poevdups #pez nn nn nn nn ?nn &ehfpg#pez &ehfpg$sjnq%jft #ppu insert the boot, ferule into the cable and cut the cable as fg.1. please be careful to not damage the outer conductor. cut the insulator and outer conductor as fg.2. pre-solder the center conductor and cut as fg.2. when cutting the insulator, please be careful to not damage the center conductor. solder up the contact to the center conductor. spread the end of the outer conductor to insert the body between insulator and outer conductor easily. please do not pick the outer conductor. please be caredule to not be swelled up the solder. shave the excessed solder along the outside of the contact. please be careful to not deform the insulator by soldering. insert the body into the cable between insulator and outer conductor until the top of the contact is on the same plane with the top of the body and move the ferule to the body. crimp the ferule at position and position . cover the boot on the ferule . a b parts confgulration
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. 11 assembly instruction3 insert the body into the above cable assembly and screw up the body by the wrench tightly. recommended tightening torque : 196 n?cm(20kgf?cm) $poubdu"ttfncmz 1mvh#pez *otfsujoh5ppm 'fsvmf gps%7 gps%73(#6
nn nn nn 'fsvmf %7 'fsvmf %7 3(#6 nn " 4pmefsjoh dsjnqjoh $poubdu"ttfncmz 1mvh#pez *otfsujoh5ppm 'fsvmf gps%7 gps%73(#6
nn nn nn 'fsvmf %7 'fsvmf %7 3(#6 nn " 4pmefsjoh dsjnqjoh cut the cable as fg.1. please be careful to not damage the outer conductor. insert the ferule. in case of 2.5d-2v cable, insert the ferule into the cable and push the ferule between sheath and outer conductor until the head of ferule is reached to the sheath by inserting tool(e3001-160) and pick the outer conductor. in case of 1.5d-2v or rg-179b/u cable , insert the ferule until the ferule reached at the sheath and pick the outer conductor. insert the contact assembly into the above cable assembly. solder up the contact with center conductor and crimp the root of the contact assembly. folding down the outer conductor to the ferule and cut the couter conductor along the ferule as fg.3. cut the insulator and center conductor and pre-solder the center conductor. applicable cable a 2.5d-2v 4mm 1.5-2v, rg-179b/u 5mm parts confgulration
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction4 12 cut the cable as fg.1. l amm=lmm-12mm remove the sheath please be careful to not damage the outer conductor. insert the ferule and spread the tip of the outer conductor. plunge the sleeve by stripper without diging the edge. cut the center conductor by stripper as fg.4. " # $ # %

- -" 4mffwf 'fsvmf 'fsvmf 4mffwf *otvmbups $poubdu $sjnq $sjnqbsfb #pez #bzpofu %fmubnbuf0vufs$poevdups *otvmbups #/$1nbujohtjef
$bcmf 4usjqqfs " # $ # %

- -" 4mffwf 'fsvmf 'fsvmf 4mffwf *otvmbups $poubdu $sjnq $sjnqbsfb #pez #bzpofu %fmubnbuf0vufs$poevdups *otvmbups #/$1nbujohtjef
$bcmf 4usjqqfs put the contact into the crimp tool attachment and insert it into the crimp dies as fg.7. insert the center conductor into the contact hole and crimp the contact with touching the contact brim to the end of sheath. cut the insulator by stripper as fg.5. insert the stripper and dig the edge to the insulator. rotate the stripper a few times and pull of the insulator. trim the extra outer conductor along the sleeve. insert the above contact assembly into the body until the top of contact is same plane as rim of outer conductor. after the contact brim is inserted into the body, do not rotate the cable and body. put the above cable assembly in the crimp tool and crimp the root of the body. please match the hex of dies with the hole of the body. *the insulator is attached with bnc-p-1.5d-cr10-cf. please cover the sheath when crimping the contact. assembly tool attachment cr-h-1115 cr-h-1116 89134 cr-h-1120a 89141 for cr-h-1120a parts confgulration
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction5 /vu #pez"ttfncmz 8btifs (btlfu $mbnq - $bcmf /vu 8btifs (btlfu /vu ? ? 4ifbui $foufs$poevdups 0vufs$poevdups 1sftpmefsjoh $mbnq $vuuifpvufsdpoevdups bmpohuifdmbnq 0vufsdpoevdups *otvmbups ? )fy%jb $bcmf"ttfncmz #pez"ttfncmz /vu /vu 4pmefsjoh #pez"ttfncmz 4ifbui $poubdu $foufs$poevdups /vu #pez"ttfncmz 8btifs (btlfu $mbnq - $bcmf /vu 8btifs (btlfu /vu ? ? 4ifbui $foufs$poevdups 0vufs$poevdups 1sftpmefsjoh $mbnq $vuuifpvufsdpoevdups bmpohuifdmbnq 0vufsdpoevdups *otvmbups ? )fy%jb $bcmf"ttfncmz #pez"ttfncmz /vu /vu 4pmefsjoh #pez"ttfncmz 4ifbui $poubdu $foufs$poevdups cable length require for the single ended cable assembly l =l 1 +0.3 1-1.cut the cable as fg.1. 1-2. pre-sollder the center conductor. noteplease be careful to not damage the outer conductor. 1-3insert the nut 1, washer and gasket. 2-1.insert the clamp into the outer conductor and put it on the sheath. 2-2. pick the outer conductor and fold down to the clamp and cut the extra outer conductor along the clamp. 3-1.insert the above cable assembly into the body. 3-2.screw up the nut1 to the body. recommended screw toque117.6 ? 147n?M 12 ? 15kgf?M 4-1.solder up the contact with the center conductor 4-2.screw up the nut2 to the body. recommended screw torque49n?M 5kgf?M 13 parts confgulration
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction(6 -
? ? /vu 8btifs (btlfu $mbnq /vu #pez"ttfncmz $bcmf /vu 8btifs (btlfu 0vufs$poevdups $mbnq *otvmbups $foufs$poevdups 1sftpmefsjoh
$bcmf"ttfncmz )fy%jb
? #pez"ttfncmz 4pmefsjoh /vu $poubdu4mju $bcmf $vuuifpvufsdpoevdups bmpohuifdmbnq -
? ? /vu 8btifs (btlfu $mbnq /vu #pez"ttfncmz $bcmf /vu 8btifs (btlfu 0vufs$poevdups $mbnq *otvmbups $foufs$poevdups 1sftpmefsjoh
$bcmf"ttfncmz )fy%jb
? #pez"ttfncmz 4pmefsjoh /vu $poubdu4mju $bcmf $vuuifpvufsdpoevdups bmpohuifdmbnq the cable length require for the single ended cable assembly. l 1 =l+3.3 1-1.insert the nut1, washer and gasket. 1-2. cut the cable as fg.1. noteplease be careful to not damage the outer conductor. 2-1.insert the clamp into the outer conductor and move to the sheath. 2-2.pick the outer conductor equally. fold down to the clamp and cut the extra outer conductor along the clamp. 3-3.cut the insulator as fg. 2. 2-4.pre-solder the center conductor and cut the center conductor as fg.2. 3-1.insert the above contact assembly into the body assembly. notethe center conductor is located in the center of contact slit. 3-2.move the nut1, washer and gasket to the body. 3-2.screw up the nut1 to the body. recommended screw torque117.6 ? 147n?M 12 ? 15kgf?M 4-1.solder up the contact with center conductor. 5-1.screw up the nut2 to the body. recommended screw torque49n?M min. 5kgf?M min. 14 parts confgulration
unitmm http://www.ddknet.co.jp bncseries please acknowledge that the specifcation etc. of this catalog might change by the improvement etc. without notice. moreover, the characteristic and the specifcation of the published product are the reference values. please confrm the content with the latest delivery specifcations when you use the product. assembly instruction7 1sftpmefsjoh /vu 8btifs $mbnq 8btifs #pez"ttfncmz /vu $bcmf 4ifbui 0vufs$poevdups 8btifs *otvmbups 0vufs$poevdups /vu 8btifs $mbnq 0vufs$poevdups #pez"ttfncmz /vu 4pmefsjoh $poubdu4mju ? ! 1sftpmefsjoh /vu 8btifs $mbnq 8btifs #pez"ttfncmz /vu $bcmf 4ifbui 0vufs$poevdups 8btifs *otvmbups 0vufs$poevdups /vu 8btifs $mbnq 0vufs$poevdups #pez"ttfncmz /vu 4pmefsjoh $poubdu4mju ? ! the cable length require for the single ended cable assembly l 1 l 1 =l+3 1-1.cut the cable as fg.1. noteplease be careful to not damage the outer conductor. 2-1.insert the nut1, washer1 and insert the clamp on the outer conductor and move to the sheath. 2-2. fold down to the clamp and cut the extra outer conductor in 3 mm from the clamp. 2-3.move the washer 1 and nut 1 to the clamp. 3-1.insert washer 2 on the outer conductor and cut the insulator as fg.3. 3-2. pre-solder the center conductor and cut the center conductor as fg.3. 4-1.insert the above cable assembly into the bodyassembly and screw up the nut 1. recommended screw torque196n?M20kgf?M notethe center conductor is located in the center of contact slit. 5-1.solder up the contact with center conductor. 5-2.screw up the nut 2 to the body. recommended screw torque49n?M5kgf?M 15 parts confgulration

▲Up To Search▲

Price & Availability of BNC-P-3-CF

	To Download BNC-P-3-CF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .